Machinekit Meetup April 29/30, Madison/WI at the Tormach facility
Posté : 26 avr. 2017, 23:04
Pour faire suite au meetup Machinekit hébergé par Electrolab en juillet 2016, la prochaine session aura lieu dans quelques jours à Madison (USA) chez Tormach.
Vous pourrez suivre les conférences en ligne.
Voici le programme posté sur la ML Machinekit, avec de la pub pour Electrolab
J'y serai pour présenter un update sur les projets C3000 et Emco 120P.
Ici, une vidéo du Makerspace local, "Sector 67" : https://www.youtube.com/watch?v=WXbfJYsdXhA
Ca ressemble beaucoup à "chez nous".
Frédéric.
----
Hello everyone,
Here is the updated agenda with links to the YouTube/Hangouts on Air event. To make sure you do not miss your favorite talk, please use the reminders you can set on YouTube.
As a warmup and introduction to Machinekit I recommend to watch the "Session 1, Machinekit Introduction" from the Machinekit Europe meeting last year kinldy provided by Frederic from the ElectroLab Hackerspace: https://youtu.be/OVVGdQnz5Ts
Agenda for Saturday, April 29th:
9:00 am - doors open
9:30 am - "Current Status of Machinetalk" by Alexander Rössler
https://www.youtube.com/watch?v=8qzKLiO2chU
10:30 am - "C3000 and Emco 120P Retrofit" project by Frederic Rible
https://www.youtube.com/watch?v=zVUMC1mdQKg
11:30 am - Tom M - MPCNC + FreeCAD Path work bench
https://www.youtube.com/watch?v=R7RVRys4uiA
12:00 am - 1:00 pm lunch break
1:30 pm - "Getting Started with Machinekit on SoC+FPGA" by Charles Steinkuehler
https://www.youtube.com/watch?v=veM83KCytuQ
2:30 pm - "The Arcus 3D M2 Mixed Material Filament Printer" by Daren Schwenke
https://www.youtube.com/watch?v=x2tNMsqMUDo
3:30 pm - "Machinekit at PMCS Stone" by Daniel Skrlin
https://www.youtube.com/watch?v=uT-tAweP21U
4:00 pm - "Overview of Machinekit Multicore" by Alex and Charles, presentation and write-up provided by Mick
https://www.youtube.com/watch?v=vHJ_s6ZoW4I
Afterward: drinks and food at a local brewery.
--
Alexander
Vous pourrez suivre les conférences en ligne.
Voici le programme posté sur la ML Machinekit, avec de la pub pour Electrolab
J'y serai pour présenter un update sur les projets C3000 et Emco 120P.
Ici, une vidéo du Makerspace local, "Sector 67" : https://www.youtube.com/watch?v=WXbfJYsdXhA
Ca ressemble beaucoup à "chez nous".
Frédéric.
----
Hello everyone,
Here is the updated agenda with links to the YouTube/Hangouts on Air event. To make sure you do not miss your favorite talk, please use the reminders you can set on YouTube.
As a warmup and introduction to Machinekit I recommend to watch the "Session 1, Machinekit Introduction" from the Machinekit Europe meeting last year kinldy provided by Frederic from the ElectroLab Hackerspace: https://youtu.be/OVVGdQnz5Ts
Agenda for Saturday, April 29th:
9:00 am - doors open
9:30 am - "Current Status of Machinetalk" by Alexander Rössler
https://www.youtube.com/watch?v=8qzKLiO2chU
10:30 am - "C3000 and Emco 120P Retrofit" project by Frederic Rible
https://www.youtube.com/watch?v=zVUMC1mdQKg
11:30 am - Tom M - MPCNC + FreeCAD Path work bench
https://www.youtube.com/watch?v=R7RVRys4uiA
12:00 am - 1:00 pm lunch break
1:30 pm - "Getting Started with Machinekit on SoC+FPGA" by Charles Steinkuehler
https://www.youtube.com/watch?v=veM83KCytuQ
2:30 pm - "The Arcus 3D M2 Mixed Material Filament Printer" by Daren Schwenke
https://www.youtube.com/watch?v=x2tNMsqMUDo
3:30 pm - "Machinekit at PMCS Stone" by Daniel Skrlin
https://www.youtube.com/watch?v=uT-tAweP21U
4:00 pm - "Overview of Machinekit Multicore" by Alex and Charles, presentation and write-up provided by Mick
https://www.youtube.com/watch?v=vHJ_s6ZoW4I
Afterward: drinks and food at a local brewery.
--
Alexander