Page 1 sur 1

PicSat on le reçoit au lab ?

Posté : 15 janv. 2018, 21:50
par fabrice
https://picsat.obspm.fr/home/getting-started?locale=en

You are a radioamateur, or you want to try to build your own antenna and listen to PicSat

That is cool! The PicSat team is really excited at the idea of collaborating with the amateur community to operate the satellite!

A number of pages containing information for you to understand the communication protocol of PicSat, as well as detailed instructions on how to build and operate your own reception station, are being prepared for anyone interested.

PicSat will be using 435.525 MHz for downlink and 145.910 MHz for uplink, GMSK modulation, with G3RUH scrambling.

We are in the early phase of the mission, and the satellite and its instrument are not fully commissionned yet. These are very busy times for us. We are doing the best we can to release these pages as soon as possible. We think that we will be able to release at least part of them before the end of January 2018. In the meantime, check the news, and follow PicSat on Twitter @IamPicSat to stay up-to-date with what is going on!

Re: PicSat on le reçoit au lab ?

Posté : 16 janv. 2018, 09:42
par f4grx
C'est certainement possible, des softs SDR sont en cours, y compris via gnuradio.

Modulo un peu de temps libre, que les administrateurs ont rarement... Qui des non admins s'y colle? Pas besoin d'indicatif d'amateur pour recevoir des signaux!

Re: PicSat on le reçoit au lab ?

Posté : 16 janv. 2018, 12:51
par fabrice
Perso c'est pas ma spécialité, mais comme c'est un sujet qui fait le buzz, le lab peut en profiter ...

Re: PicSat on le reçoit au lab ?

Posté : 09 févr. 2018, 18:13
par xtof
Oui Picsat a été reçu au lab avec la station sol. Le modem plus le logiciel de récupération de trame a été installé sur le PC de la station.
417 trames reçues ont été envoyé sur le site Picsat

N'hésitez pas à me contacter pour une démo.